Keibler-Thompson Model KT-50

The KT-50 is a mobile demolition machine for steel mill use.

Designed and built from the ground up by Keibler-Thompson, a steel mill contracting company with over 25 years of experience, first for its own use, the newly developed KT-50 machine is a remote controlled, crawler mounted machine with telescoping boom. Typical applications include ladle and furnace deskulling and refractory tearout.

General Specifications

Overall Dimensions: Width 8’-6” (2591mm) Length without attachment: 27’-10 3/8” (8493 mm) Height 10’-7” (3226 mm) Weight 56,000 Lbs (25,401kg) Working Ranges: Boom Angle Up 30º Boom Angle Down 87º Tool Angle Up 42.5º Tool Angle Down 122º Boom Stroke 13’-6” (4115 mm) Boom Rotate 360º continuous Boom Swing 360º continuous Engine Specifications: Cummins Diesel Model 6BT5.9 6 Cylinder Turbocharged and Aftercooled Water Cooled 185 HP (138 kw) @ 2500 RPM Fuel Tank: 80 gallon (303 L) Hydraulic System: Pumps - Two variable displacement, piston, 0-65 GPM (0-246 L/min), and one Auxiliary fixed-displacement gear pump, 30 GPM (114 L/min) Filters with service lights: Three 7 micron in pressure line One 7 micron in return line Three 100-mesh pump inlet strainers Reservoir Capacity - 165 gallon (625 L) Valves - Two parallel valve groups, pressure compensated, load independent, electric solenoid controlled Automatic low pressure/high temperature shut down with indicator light

Operator Controls: Electric Remote Control System 50’ (15.2 m) control cable Rocker/Toggle switch control box Emergency Stop Mushroom switch Optional Equipment: Pneumatic Hammer Kent Model RAM999 Blows/minute - 600 FtLb Class - 1000 (138 kgm) Tool Diameter - 3-1/2” (89 mm) Air Consumption - 250 CFM (7.1 cu.m/min) Hydraulic Hammer Rammer Model S27 Energy Class - 1,000 J Blows/minute - 500 to 1,300 Tool Diameter - 3.54” (90 mm) Operator Cab Air Conditioner Steel Mill Ripper, Single Tooth Buckets: 36” (914 mm) - 0.44 cu. yds (0.34 cu. m) 48” (1219 mm) - 0.59 cu. yds (0.46 cu. m)

Keibler-Thompson Model KT-23

Remote Controlled - Diesel or Electric. The KT-23 is built for tough demolition jobs that require a hard hitting hammer on a compact carrier. Designed for steel mill applications, this versatile machine also performs well in other primary metal plants where refractory tear out work is a critical maintenance function. The KT-23 has a rugged crawler undercarriage to climb over uneven ground and a telescoping boom to reach the hammer into tight places. Powerful hydraulics provide high break out force to remove hard slag build-up or monolithic refractory. The remote pendant control lets the operator move to his best position for visibility and safety which improves tear-out performance and precision. The results are quicker relines with less down time production loss for metal producers.

Keibler-Thompson Model KT-30

Built specifically for impact hammering, the KT-30 has powerful and well protected hydraulics, along with a remote control system that gives operators the confidence and safety to "muscle-out" tough jobs.

A unique double pivot boom designs keeps overall profile height low but "unfolds" for maximum reach when needed. Clearly built for steel mill duty, the KT-30 can bring reliability and toughness to any demolition job. When demolition work needs to be done, don't destroy your other machine that was built to dig dirt.

Keibler-Thompson Model KT-15K

Cut Costs by 50%! Reduce Downtime by 75%! The key to this productive method of refractory tear out is the KT-15K machine, designed and built in the USA specifically for kiln use. The KT-15K quickly strips coating, bricks and castable refractory with minimum effort using powerful hydraulics. A skid steer loader with a radius bottom bucket carries the material out of the kiln. No need to rotate the kiln, so other repairs can be done at the same time. The KT-15K can achieve production rates in excess of twelve feet per hour on average size kilns.

Keibler-Thompson Model KT-5

The KT-5 is a small, remote controlled track loader that fits almost anywhere to mechanize those tough-to-handle jobs. It saves labor, cuts cost and slashes turn-around time on production equipment.

The KT-5 breaks down into three major components that can be assembled in an hour. Disassembled, it is small enough to fit through a 36" diameter round access hole. It can clean open hearth flues, go inside a T-Ladle, or fit in other spots too tight for any other machine.

Attachment Selection: The KT-5 is available with two basic attachments, loader lift arms and a telescoping boom. Quick change demolition hammers and loader buckets are available for both attachments, so you can break out brick or slag and then load out loose material.

Keibler-Thompson Model EL-1300 Refractory Tear-Out Skimmer

Keibler Thompson Corporation's EL-1300 machine is built specifically for refractory tear-out of electric furnaces and ladles. This steel mill proven machine can handle complete de-bricking of average water cooled furnaces in less than 5 hours from time of last tap. This includes cool down, set-up and brick removal. Between furnace rebuilds, the EL-1300 performs ladle maintenance such as rim cleaning, porous plug removal and complete refractory tear out. Full utilization of the EL-1300 along with its time saving advantages makes it a cost effective maintenance machine.

Keibler-Thompson Model RFL-2 - Reheat Furnace Loader

Keibler-Thompson's model RFL machine is a remote controlled loader built specifically for reheat furnace clean-out. The RFL is small and compact but has the power to move hundreds of pounds of heavy scale with each bucket load. The crawler undercarriage provides good traction and it allows the machine to work on very hot surfaces. Remote control lets the operator choose the optimum position for visibility, comfort and safety. Complete scale removal of a typical reheat furnace can be accomplished in 24 hours using the RFL machine.

Keibler-Thompson Model SK-25 - Ladle Skimmer

The SK-25 ladle skimmer is used for removing molten slag from hot iron or steel ladles. Its fast and powerful boom allows quick skim times and gives precise control for efficient slag removal. The proven friction roller drive design eliminates problems with rack and pinion or chain drive of similar equipment. Quick change feature allows the entire boom to be exchanged in less than one hour to reduce maintenance outages. Set up in a variety of configurations, the SK-25 machine the mounting pedestal base, skimmer boom, hydraulic power unit and operator control station. KT engineers will customize the right system for you.

Keibler-Thompson Model Stoker

Electric Powered - Hydrostatic - Tight Steering Radius. The KTS stoking machine is used for stirring and mixing batch materials in continuous feed submerged arc furnaces. The high temperature and extreme operating requirements of this type of work have brought about the rugged design of the KTS stoker. For heavy duty service, this hydrostatic unit has a unibody frame constructed of 2" steel plates that also provide good balance and positive traction. The oversized hydraulic reservoir and heat exchanger help keep the hydraulic system running cool and efficient. Power steering and a tight turning radius allow the KTS stoker to maneuver in the most confined spaces and the single pivot boom makes operation quick and easy. Variations of the basic model are available to suit your specific needs.

Home | About Us | Offices | News | Map | Index | Contact Us

* * * *
Copyright © 2003, Ferrex International, Inc. All rights reserved.